Supplying brick slips, stone cladding and bespoke surfaces to the UK's architectural, construction, landscaping and interior design industries
Stone Cladding
Our stone slips are an ideal cladding solution for any new build, renovation, commercial build, landscaping or interior design project - limitless design possibilities.
Slim, lightweight and easily installed directly on to a range of surfaces without – reducing building costs.
A metal mesh backing would be required when installing at height on apartment or commercial buildings.
Our stone slips are engineered by mixing stone aggregates, volcanic rock, concrete additives and natural colour pigments, they are 100% recyclable – more sustainable.
Fireproof and resistant to extreme temperatures, heat, UV, humidity, high winds, frost, salt and water – more durable.
All our stones come with known certifications, test reports, safety data sheets, flammability certification and a 30 year limited warranty.
We also supply corners, adhesive, grout (in 12 colours) and sealant
Design 4 Build Are Exclusive UK Suppliers of
Rough Textured
Isola Linear Stone
(9 colours available)
Bretagne
(4 colours available)
Cordillera
(6 colours available)
Terra Ragstone
(3 colours available)
Medium Textured
Highland Stacked Slate Stone
(10 colours available)
Alverstone Z Stone
(4 colours available)
Fieldstone
(2 colours available)
Arcadian Ragstone
(3 colours available)
Cotswold Stone
(2 colours available)
Pennant Stone
(2 colours available)
Kentish Ragstone
(9 Colours Available)
Orion Sandstone Panel
Orvilis
Tuscany
(6 colours available)
Altaia
(4 colours available)
Portland Stone
(4 colours available)
Vermont (Sandstone)
(3 colours available)
Isola Slim Linear Stone
(6 colours available)
Aragon
(5 colours available)
Ekali Ragstone
(5 Colours Available)
Delos
(4 colours available)
Armorique
(6 colours available)
Dune
(4 colours available)
Smooth Textured
Alamo Sandstone
(2 colours available)
Bath Stone
(2 colours available)
Sierra
(8 colours available)
Atlas
(4 colours available)
Veracruz
(3 colours available)
Highland Blend
(6 colours available)
Pebble Stone
(3 colours available)
Wood Effect Stone
(6 colours available)
Easy Installation
Lay out 1 - 2 meters of the stones on the floor.
Arrange the stones in your desired pattern.
Apply adhesive to the surface then onto the entire back of each stone and press firmly into place.
If the installation includes corners, begin with these and continue the installation in line with the flats.
Any gaps to be filled, all our stones can easily be cut with an angle grinder.
For installations with joins, spacers can be used and then grouted with a grouting gun.
For installations over 3m a concrete substrate primer would need to be applied to the surface pre-installation.
Once the stones have been installed and grouted (if the stone requires grout) leave for 48 hours to set then brush off any excess dirt or dust and then apply the mat clear protective stone sealant.
We also supply an extra strong stone slip adhesive, grout (in 12 different colours) and a clear mat protective stone slip sealant
Ecological and Sustainability Advantages
Engineered with 100% recyclable materials
Not quarried or mined - unharmful to natural resources
Low emitting material classified as A+
A+ certified for emission of volatile organic compounds
Lightweight material - energy saving transport - less CO2 emissions
Lightweight material - requires less reinforcement of the concrete substrate
Sustainable production system - energy saving - less CO2 emissions
Sustainable waste management - production leftovers are recycled and reproduced to new stone veneers or brick slips
Cooperation with cement companies committed to preserving sustainable development
Thermic insulation properties - energy saving - less CO2 emissions
All stones and bricks packed in cardboard boxes made from recycled paper
Certifications, Performance Tests and Reports
All Mathios stone and brick slips have all known certifications and reports
ENs regulation certifications accepted and recognised within in the UK
The production and specifications of Mathios Stone comply with the requirements of UK and European Union building regulations and is certified in accordance with UK and European standards
Laboratory tests of the Institute of Geology & Mineral Exploration
Performance tested showing excellent external and internal durability
Weather resistance to extreme temperatures performance test reports
Fire tests reports, fireproof and flammability certified
All Mathios stone veneers and brick slips come with a 30 year limited warranty
Delivery
Orders under 150m delivered within 2 - 3 weeks / Larger orders delivered within 4 - 5 weeks
For costs and quotes please contact us at info@design4build.uk or call our office on 0208 502 4640